Previous Thread
By brute force (and a Phillips Pronto TSU9600), I've discovered a "discrete ON" for the EVA8000 power. The Pronto hex sequence is:
<pre>
5000 0000 0000 0001 0017 0027
</pre>
But I could NOT fins a discrete OFF!! The power toggle is
<pre>
5000 0000 0000 0001 0017 0043
</pre>
I can probably get by with a code that sets power to a known state, and one that toggles it from there, but a real off would be nice. Do any Netcom engineers monitor these threads?
Ron
Add Your Reply
Sponsored Links
Copyright © 2009
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
Drobo Space |
DVR playground |
MediaSmart Home |
MotoDash |
My DigitalEntertainer |
My Open Router |
Robo Community |
Sansa Community |
Sling Community |
TechLore |
TiVo Community |
TouchSmart Community
DigitalEntertainer™ is a trademark of NETGEAR®. MyDigitalEntertainer.com is not affiliated with NETGEAR. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). © 2007 NETGEAR, Inc. All rights reserved.
Searching further up the unused codes, another discrete ON and a discrete OFF have been found ar (hex) 0068 and 0083 respectively, so I now have the control I need for my universal remote. But I also suspect from posts on Remote Central that the discretes may be EVA firmware related, so the one quoted are for 1.2.20 (UK) -- the latest available to me (I'm located in Australia, not the UK!!!)