Hi there!

First, I'd like to say hello to the community - I'm german, living in Switzerland.

My configuration:

EVA8000 connected wired to router d-link DI-524
Qnap TS-109 II pro connected also wired to DI-524
DVB-Set-Top-Box with Linux (called dbox, similar to dreambox) also connected wired to DI-524
The DVB-Set-Top-Box uses NFS which is also supported by the Qnap TS-109.

My problem:

Recorded video will be scanned from EVA8000 well and showed up. Trying to play these .TS-files will only show video but no sound! I've recognized that streams with only mpg-audio are playing fine with audio also. Recorded video which contains also ac3 streams inside have this above mentioned bug (no sound).

What can I do? Do I have to set special user rights to the folder where the recorded video is located? Sounds not very senseful, because mpeg audio videos plays and sounds well. If I run the video through an audio/video processing tool, called projectX (great for dvb-streams), and play afterwards then with EVA8000 sound is present! Does this mean my DVB-Set-Top-Box doesn't record the stream properly or more likely the tv station broadcast a non-conform dvb-stream? 

It's a really pitty - because video playback with the DVB-Set-Top-Box results in stuttering, as the hardware is too old and too slow (67 MHz CPU, 10 MBit network!) but would be fine with EVA8000 - but without sound not very amusing. I don't want and have not enough spare time to perform video processing with down- and uploading the files and so on which would be medieval in these days.

Anyone ideas?

Thanks.

Televisor